Sys enters the System Menu from the main menu.
Speed modifies delay and frequency (1 Hz resolution mode) data
values by 100X.
Exit:
Exit to the Main Menu.
8. Rotary Thumb Wheel – Changes parameter data values. The wheel has travel velocity
sensing which ease large incremental data modifications. For modifying delay and
frequency
(1
Hz
resolution),
pressing
the
Speed
key
simultaneously
will
increment/decrement the data value by 100X.
Operating the Channel Menus
Channel Linking – While holding down the
<<Menu
or
Menu>>
, more than 1 channel from
the same group (Input or Output group) can be selected to link the channels together. The
green LEDs below the
Mute
buttons are lit for the linked channels. Any modification of the
data for the selected channel will be applied to the linked c hannels as well. To cancel the
linking, simply deselect the desired channel while the
<<Menu
or
Menu>>
key is still
pressed, or just press the
Exit
key to deselect all channels.
Input/Output Signal
LEVEL:
The level (or gain) ranges from -40.00dB to +15.00dB in 0.25dB steps.
POL:
The polarity (or phase) can be normal (+) or inverted (-).
DELAY:
The maximum delay permitted is 650ms, in steps of approximately 10us.
It can be
displayed in ms, ft or m.
The time unit of the delay is set in the
System Menu
.
Please
refer to page 21 for more details.
Input/Output Equalizer
EQ#:
Each input channel has 8 bands of equalization.
This control selects one of the 8
available bands.
BYPASS:
This control will un-bypass (Off) or bypass (On) the currently selected band.
