Xicom XTU-400K, Руководство по эксплуатации и установке

Страница: 85 / 189

MNC-0400-001 25 of 54 Revision G
Operation, Rack and Digital HPAs
exceeds the allowed number, the oldest entry is dropped. The
GAIN control knob is used to scroll through the list of faults.
Press [ Enter ] to return to the Alarms/Faults Menu.
Set Max Power Menu
The Set Max Power Menu , Figure 10 allows you to control the
maximum power detection circuits.
The front panel 10-key pad and three of the softkeys of the Set
Max Power Menu are active. The front panel 10-key pad is used
to enter the desired maximum power level.
Entries are in the units shown on the second line. Press [ Clear ]
to clear your entry. Press [ Enter ] to accept your entry.
The Set Max Power Menu softkey functions are:
[Softkey 1]— Cycles one step each time the softkey is pressed.
The step sequence is:
OFF ALARM FAULT OFF etc.
The three choices are:
OFF — Disables the alarm and fault detection functions.
ALARM — Enables the maximum power-detection circuit
alarm. The display will show the Alarm and the buzzer
will sound but the amplifier will stay on.
FAULT — Enables the maximum power fault detection
circuit. The display will show a Fault; the buzzer will
sound and the high voltage will shut off.
[Softkey 2]— Not Used. Numeric value shown on the line to the
left of this softkey is the current power level setting.
[Softkey 3]— Not Used (Value you enter from the keypad is
displayed to the left of this key.)
Entries are in the units shown on the second line.
[Softkey 4]— Pressed to return to the Alarms/Faults Menu .