XFL product
• After measuring length of mounting channel, carefully cut the light
strip to desired length.
• Make sure to ONLY cut along the dashed lines provided. These
dashed lines divide two sets of positive and negative connection
points.
3
• Using a lint-free cloth, wipe the installation surface with 50/50
alcohol solution to ensure a clean mounting surface free of
oils, silicones and dirt particles.
• A smooth mounting surface is required to ensure proper
adhesion.
2
1
INSTALLATION IN CHANNELS
Ensure that wires are
long enough to
extend past end cap
Check that end caps and
mounting channels were
included with channel order
Channel and lens sized to ensure that lengths
match. Carefully handle lens to avoid cracking.
Carefully align full length of channel,
with end of one strip to end of next
strip to avoid breaks in lighting.
Rev 1.2 | February, 2022
5
WET LOCATION
DC ONLY
XFL Flexible Linear LED Light Installation Instructions