Rev 1.2 | February, 2022
3
WET LOCATION
DC ONLY
XFL Flexible Linear LED Light Installation Instructions
Important factors to consider when designing a lighting system are:
• The total lighting wattage the installation will require.
• The length and size of wiring needed to connect light strips to the power supply.
WIRING CONSIDERATIONS
POWER SUPPLY
• XFL product requires a UL Listed Class 2 or SELV 24V DC power supply.
• This product operates on low voltage 24V DC power
• 24V DC power supplies are sold separately in different wattages.
• Polarity symbols should match on input cables.
• Do not connect XFL product to any high voltage AC power supply between 100V - 277V.
• Remove XFL product from reel before applying power.
• Apply power to test XFL product before mounting.
• Do not exceed maximum suggested run length. Doing so may cause inconsistencies in
brightness and performance.
• Do not exceed 80% of power supply rated wattage. Doing so may cause overheating,
shorting, and possible fire. Doing so may also shorten the lifespan of the power supply.
• Always disconnect the power supply before cutting or connecting XFL product.
• Never attempt any work before shutting off the electricity.
BENDING RADIUS
Bending may damage circuit traces.
Do not exceed maximum bend radius specified in XFL data sheet.
ADHESIVE APPLICATION
• The backing tape on XFL products is coated with a
strong adhesive that is intended for a single application only.
• Apply only when a lighting location is fully determined.