TUTA-B23 GSM REMOTE CAMERA USER MANUAL
4.7.1 Loading sensor onto the camera
1. Power on the wireless sensor.
2.
Master
or
family
user sends following SMS message to
make TUTA camera
enter loading mode:
Arming-alarm mode:
#05#
SensorDescription
#
(31)
Always-alarm mode:
#196#
SensorDescription
#
(32)
•
SensorDescription
is used for identify different sensors affiliated with each
camera. It can be numbers and letters.
•
SensorDescription
could be empty. For #05#, TUTA camera will name the
sensors with Sensor and number such as: Sensor1, Sensor2, Sensor3. For
#196#, TUTA camera will name the sensors with SOS and number such as
SOS1, SOS2, SOS3.
•
Up to 9 characters can be included in the
SensorDescription
•
Sensor alarm default only send SMS, if user want the camera sending SMS &
MMS of this sensor alarm, it need to add * in front of sensor description, such
as #05#*door#.
3. When TUTA camera received the SMS command, it will emit a BEEP tone and
the indicator will flash red and green alternately. TUTA camera will then send a
notification SMS to the user: Camera pairing sensor, activate sensor then wait
for confirmation SMS.
4. The user needs to make the sensor work and transmit signal to be studied by
TUTA camera.
5. When TUTA camera receives the sensor signal, it will emit a Beep tone and
send a notification message via SMS: Sensor*** successfully paired.
6. To exit the loading mode manually, press the
Reset key
of the camera, TUTA
camera will emit a Beep tone and exit the loading mode.
4.7.2 Removing sensor
Master
and
family
user sends following SMS message to TUTA camera:
Remove a sensor:
#112#
SensorDescription
#...#
SensorDescription
#
(33)
Remove all wireless sensors:
#112#
(34)
•
Sensor description
should be the existing sensor which the user wants to
remove.
22
