TUTA-B23 GSM REMOTE CAMERA USER MANUAL
Disable timing arm the camera:
#128#0#
(27)
•
WorkDay
: The value description is same with command 21.
•
Up to 3 periods be allowed per workday. Each period time should set by
ArmTime
,
DisarmTime
.
•
ArmTime and DisarmTime
: Be
consists of 4 digits (hh:mm) and works on a 24
hour clock. For example: 0000 means time 00:00(hh:mm), 2359 means time
23:59(hh:mm). The ArmTime and DisarmTime should be in the same day, and
the DisarmTime must be later than ArmTime during the same period.
4.4 Emergency alarms
The user press the remote control emergency button
to make TUTA camera alarm.
TUTA camera will stop any other operation once it receive emergency alarm signal,
and start emergency alarm process. TUTA camera will dial the
Master
number not
more than 3 times until someone answers. If, after 3 attempts, there is no answer,
TUTA camera will automatically stop dialing and revert to its preset mode.
Master
can
listen in the live audio by answering the call. (Refer remote control instruction parts.)
4.5 Remote control
4.5.1 Pairing remote control
Normally the remote control was paired in factory. if the remote camera can not work
with TUTA camera, user should pair the remote control separately. A camera can pair
up to 5 remote controls.
Camera indicator
Operations
Status
Green, flashing or
constantly light.
1. Press and hold the
Reset
key
for 2 seconds
Indicator light turns to orange
(Learning mode)
Orange, flashing
2. Press any button on the
remote control (with battery
inside) to send a signal to
TUTA.
TUTA will emit a “Beep” tone
and indicator will turn green for
2S. (Added successfully.)
Orange, flashing
3. Repeat step2 to load
another new remote control.
Orange, flashing
4. Press the
Reset key
to
exit the learning mode or
waiting for 15 seconds to
Indicator light turns green,
flashing or constantly light. (Exit
learning mode)
20
