TUTA-B23 GSM REMOTE CAMERA USER MANUAL
3.4 Define guest user
Any selected person can operate in the
Guest
category if they know the password and
the SIM number. The
Guest
user(s) can then use their mobile phones to send a SMS
command including password to TUTA camera in order to obtain an MMS image.
3.5 Network parameter settings
Normally the camera will preset local operator MMS settings on the firmware. Users
needn’t to setup the MMS parameters. But if the GSM operator changes the MMS
parameters or the local MMS settings do not preset on the firmware, users will receive
SMS when they request MMS images: Sorry, the network is busy, MMS sending failed.
Master
number can setup the MMS parameters manually by following method.
Six MMS parameters be requested on the camera.
Master
user send two SMS
commands to the camera as follow.
Set MMS center:
#124#
MMScenter
#
(9)
Set APN parameters
:
(10)
#125#
Proxy IP
#
WAPProxyPort
#
HTTPProxyPort
#
APN
#
Username
#
Pssaword
#
Check the current operative network parameter settings:
#55#
(11)
•
The
MMScenter
should be the MMS center address of GSM provider.
•
For example: #124#http://mmsc.monternet.com#
#125#10.0.0.172#9201#80#cmwap#wap#wap#
3.6 Camera language
Each camera supports two default languages, English and Spanish. The user can
send following SMS command to switch language:
Spanish language:
#127#0#
(12)
English language(Default):
#127#1#
(13)
Chapter 4 Operations and settings
4.1 Call the camera to listen in
Master
and
family
user calls TUTA camera after which it will answer automatically.
The user can then listen in the live audio in the monitoring area. Only one line can be
16
