Antai Solar Mounting Rack Compliance to AS Code 1170
7
4. Put the U Bracket into the
Front Fix Foot .It is
recommended to mount them
just a bit tight, so it could be
adjusted in the mounting and
fasten completely. Fix the U
Bracket with the Rail by T
module use M8×30mm bolt.
5. Base rail installation, position
the first frame rails for each row
and fasten them temporarily to
the roof cladding using a cord.
Tighten the Allen bolts on the T
module that are used to fasten
the fix foot.
6. Install the Leg strut, put the
leg strut into the pedestal and
fasten them by M8×70mm bolt.
7.Put the Leg tube into the Leg
strut and adjust to the planed
length then using 4mm Allen key
to fix them by one set screw
M8*10mm.
