Antai Solar Mounting Rack Compliance to AS Code 1170
11
V. Warranty
10 year limited Product Warranty, 5 year limited Finish Warranty
Antai Solar Ltd warrants to the original purchaser (“Purchaser”) of product(s) that it manufactures (“Product”) at the original
installation site that the Product shall be free from defects in material and workmanship for a period of ten (10) years, except for
the anodized finish, which finish shall be free from visible peeling, or cracking or chalking under normal atmospheric conditions
for a period of five (5) years, from the earlier of
1) the date when the installation of the Product is completed, or
2) 30 days after the purchase of the Product by the original Purchaser (“Finish Warranty”).
The Finish Warranty does not apply to any foreign residue deposited on the finish. All installations in corrosive atmospheric
conditions are excluded. The Finish Warranty is VOID if the practices specified by AAMA 609 & 610-02 – “Cleaning and
Maintenance for Architecturally Finished Aluminum” (www.aamanet.org) is not followed by Purchaser. This Warranty does not
cover damage to the Product that occurs during its shipment, storage, or installation.
This Warranty shall be VOID if installation of the Product is not performed in accordance with Antai’s written installation
instructions, or if the Product has been modified, repaired, or reworked in a manner not previously authorized by Antai IN
WRITING, or if the Product is installed in an environment for which it was not designed. Antai shall not be liable for consequential,
contingent or incidental damages arising out of the use of the Product by Purchaser under any circumstances.
If within the specified Warranty periods the Product shall be reasonably proven to be defective, then Antai shall repair or
replace the defective Product, or any part thereof, in Antai’s sole discretion. Such repair or replacement shall completely satisfy
and discharge all of Antai’s liability with respect to this limited Warranty. Under no circumstances shall Antai be
liable for special, indirect or consequential damages arising out of or related to use by Purchaser of the Product.
Manufacturers of related items, such as PV modules and flashings, may provide written warranties of their own. Antai’s limited
Warranty covers only its Product, and not any related items.
Thank you for using of Antai’s mounting system, for more information about us, please contact us at:
Office Add: 508#, North Tower, Guangxia Building Huli
Torch Hi-tech Zone, Xiamen, China
Factory Add: Guanshan Industrial Park Changtai County,
Zhangzhou,China
Tel: 86-592-3852509 Fax: 86-592-3852618
Website:
www.antaisolar.com
Email: [email protected]
