Trademark
All trademarks are the property of their respective owners.
FCC Compliance
Federal Communications Commission Statement
This device complies with FCC Rules Part 15. Operation of this device is subject to the
following two conditions:
•
This device may not cause harmful interference.
•
This device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursu-
ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the manufacturer’s instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encour-
aged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment to an outlet on a circuit different from that to which the receiver is con-
nected.
•
Consult the dealer or an experienced radio/TV technician for help.
Warning:
The use of shielded cables for the connection of the monitor to the graphics card is required
to assure compliance with FCC regulations. Changes or modifications to this unit not expressly ap-
proved by the party responsible for compliance could void the user’s authority to operate this
equipment.
CE Compliance
This device is in conformity with (reference to the specification under which conformity is declared in
accordance with 89/336 EEC-EMC Directive)
EN 55022: 1998/A2: 2003
Limits and methods of measurements of radio disturbance characteris-
tics
of
information
technology
equipment
EN 61000-3-2/:2000
Electromagnetic compatibility (EMC)
Part 3: Limits
Section
2:
Limits
for
harmonic
current emissions (equipment input cur-
rent
<=
16A
per
phase)
EN 61000-3-3/A1:2001
Electromagnetic compatibility (EMC)
Part 3: Limits
Section 2: Limits of voltage fluctuations and flicker in low-voltage sup-
ply systems for equipment with rated current <= 16A
EN 55024/A2:2003
Information technology equipment-Immunity characteristics limits and
methods
of
measurement
54
Appendix
Содержание MCP55
Страница 1: ...XFX Motherboard Installation Manual Version 1 0...
Страница 57: ......
