XFX MCP55, Руководство по установке

Страница: 20 / 57

Power Supply
The motherboard uses an ATX power supply. In order to avoid damage, make sure that the power sup-
ply is connected properly before connecting the power cable to the power supply.
Attention:
Power supply plugs are designed to fit these connectors in only one orientation.
24-pin ATX power connector: PWR1
PWR1 is the ATX power connector. Make sure that the power supply cable and pins are properly
aligned with the connector on the motherboard. Firmly push the power cable into the connector and
make sure it is secure.
8-pin ATX_12V Power Connector: PWR2
The 8-pin ATX 12V power supply connects to PWR2 and provides
power to the CPU.
Graphics Power Connector: PWR3
This connector is an auxillary power connector for graphics card. It provide addi-
tional power for graphic cards configuration such as SLI.
Note:
It is recommended that you use an 8-pin 12V connector. If the power supply
only comes with a 4-pin connector, connect the 4-pin as shown.
24 23 22 21 20 19 18 17 16 15 14 13
GND +5V +5V +5V RSVD GND GND GND PS-ON GND -12V +3.3V
+3.3V +12V +12V +5V_AUX PWROK GND +5V GND +5V GND +3.3V +3.3V
12 11 10 9 8 7 6 5 4 3 2 1
24-pin ATX power Connector
GND 12V
8-pin ATX_12V Power Connector
5
4
8
1
4
1
+5V
GND
GND
+12V
Graphics Power Connector
4-pin
configuration
4 8
1 5
Chapter 2: Installation Instructions
18