XFX MCP55, Руководство по установке

Страница: 17 / 57

Installing Expansion cards
The Motherboard has two 32-bit master PCI bus slots, one PCI Express x1 slot, one PCI Express x4 slot
and two PCI Express x16 slots.
PCI Slots
PCI slots support cards such as LAN card, USB card, Firewire card, SCSI cards and other cards that has
a PCI interface.
PCI Express x1 and x4 slots
PCI Express x1 and x4 slots are designed for less bandwidth-intensive cards, such as modem and LAN
cards.
PCI Express x16 slots
The two PCI Express x16 slots supports NVIDIA’s SLI
TM
(Scalable Link Interface) technology which
allows two SLI-ready graphics cards to be installed.
Warning:
Make sure your power supply is turned off and disconnect the power cable from the electrical
outlet before inserting or removing expansion cards or other peripherals. Failure to turn off the
power supply may result in physical injuries and serious damage to your system.
The following procedure is provided for reference only, please refer to the user guide of the product
that’s you are installing for the actual procedure.
To install expansions cards:
1. Remove that bracket opposite of the slot that you instead to use. If the bracket is fastened with a
screw, keep the screw for later use.
2. Align the card connector with the slot and press firmly until the care is completely seated on the slot.
3. Secure the card to the chassis with the screw was removed earlier.
Chapter 2: Installation Instructions
15