OMNIHI5
USER MANUAL
44
MNL-0022
10. Frequently Asked Questions
10.1 What should I do if the electrical stimulation intensity is
weak?
a) Adjust the placement position.
b) Adjust the electrical stimulation intensity through the stimulator or app
software.
c) Check the battery and charge if low.
d) Wet the skin to increase the electrical conductivity between the electrode and
the skin.
10.2 What should I do if the skin in the area covered by the
electrode and the stimulator band is severely red, stinging
or allergic?
a) Stop using the device immediately.
b) Continue to use the device only after the skin completely recovers to normal.
c) If the skin irritation continues cease use of the device and notify your
physician.
10.3 What happens when there is sporadic, strong electrical
stimulation?
a) The surface of the electrode is not wet enough. Add some additional water to
the skin and electrodes.
b) Check if the skin in the area covered by the electrode is red or has a wound.
c) Check if the cuff of the stimulator is secure and the position of the electrode is
accurate.
10.4 Can I use oil or lotion on my upper limb?
No, please make sure the skin is clean before using the stimulator and fully wet the
surface of integrated electrode.
