OMNIHI5
USER MANUAL
18
MNL-0022
2) Install / Update
Click
“Get” to start the installation. If it is already installed, click “Update”, wait for the
download to complete, and the installation or update is successful. XFT-2003E can be
used along with iPad, which is installed with a software (The APP software Rev. 1)
provided by the manufacturer.
The device has two parts, the XFT-2003E and APP software, which is installed on
iPad. User interface is located on APP software, including parameters setting and
display of images. There is specific communication protocol between XFT-2003E and
APP software.
Software:
• Rev.VI
• The XFT-2003EApp named as SEMG-2003E system App for iOS;
• iOS
：
iOS 9.0 or above;
iPad Recommend:
• iPad 4 and later iPad;
• WIFI support: No;
• Network: Bluetooth;
• SSD storage: more than 16G;
Network requirements when using the APP: The APP will not be connected to the
Internet during the use of the APP, and there is no need to connect to the Internet.
Data and Device Interface:
The data in the APP is limited to internal storage access in the APP. It neither
accesses patient information data from other systems or software nor imports patient
information data into other systems or software.
The internally stored data is a patient information form and a medical treatment record
form. The APP controls the device and transmits the data from the device to the APP
according to a specific encrypted instruction protocol via Bluetooth communication.
