![background image](http://html1.mh-extra.com/html/xerox/xc-800-series/xc-800-series_user-manual_4144180006.webp)
1
Safety Notes
Your copier and supplies have been designed and tested to meet strict
safety requirements. These include safety agency examination and
approval, and compliance to established environmental standards. Please
read the following instructions carefully before operating the copier and
refer to them as needed to ensure the continued safe operation of your
copier.
Follow
all warnings and instructions marked on or supplied with the
product.
Symbology:
= High Voltage,
= Heated Surface.
Unplug
this copier from the wall outlet before cleaning. Always use
materials specifically designated for this copier. Use of other materials may
result in poor performance and could create a hazardous situation.
Do not
use aerosol cleaners. Follow the instructions in this User Guide for
proper cleaning methods.
Never
use supplies or cleaning materials for purposes other than what they
were intended. Keep all supplies and materials out of reach of children.
Do not
use this copier near water, wet locations, or outdoors.
Do not
place this copier on an unstable cart, stand, or table. The copier
may fall, causing personal injury or serious damage to the copier.
This product
is equipped with a 3-wire grounding type plug (e.g., a plug
having a third grounding pin). This plug will fit only into a grounding-type
power outlet. This is a safety feature. To avoid risk of electric shock,
contact your electrician to replace the receptacle if you are unable to insert
the plug into the outlet. Never use a grounding adapter plug to connect the
copier to a power source receptacle that lacks a ground connection
terminal.
This copier
should be operated from the type of power source indicated on
the marking label. If you are not sure of the type of power available,
consult your local power company.
Do not
allow anything to rest on the power cord. Do not locate the copier
where persons will step on the cord.
The power supply cord
is the disconnect device for this equipment.
Insure that installation is near the outlet and is easily accessible.