Scanning
4.
Program and scan the first segment:
a.
Load the originals for the first segment.
b.
Press the green
Start
button on the control panel.
Note:
If a password is required, contact the system administrator.
5.
Program and scan additional segments:
a.
Load the originals for the next segment.
b.
When the Build Job screen appears, touch
Program Next Segment
.
c.
Press the green
Start
button to scan the originals for that segment.
6.
Repeat the previous step for each remaining segment.
Note:
At any time, you can touch
Delete All Segments
to modify the job.
7.
When all of the segments have been programmed and scanned, touch
Submit the Job
. The Job
Progress screen appears, and the individual segments are scanned as a single job.
Note:
If necessary, touch
Delete
>
Delete Job
to cancel the job.
144
Xerox
®
WorkCentre
®
7970 Multifunction Printer
User Guide