Scan to FTP/SMB (Optional)
Copyright © 2007, Xerox Corporation. All rights reserved.
10
Procedure for Setup of Scan to FTP/SMB
To use Scan to PC (FTP/SMB) you need to enable the applicable Ports (SMB or FTP client)
on the Device, and make sure that an IP address has been set on the machine.
Note
The configuration can also be performed using CentreWare Internet Services. For
information on how to use CentreWare Internet Services, refer to the Internet
Services section of this guide.
1.
Display the
System Administrator Menu
screen.
a.
Press the
Log In/Out
button.
b.
Enter the
Login ID
(11111) with the numeric keypad or the keyboard displayed
on screen, then touch
Confirm
.
c.
Press the
Machine Status
button on the Control Panel.
d.
Touch the
Tools
tab.
2.
When using the
SMB
protocol, enable the
SMB
port.
a.
Select
System Settings
.
b.
Touch
Connectivity and Network Setup
.
c.
Select
Port Settings
.
d.
Select
SMB
and then select
Change Settings
.
e.
Select
Port Status
and then select
Change Settings
.
f.
Select
Enabled
then select
Save
.
g.
Select
Close
until the
Port Settings
screen is displayed.
3.
When using the
FTP
protocol, enable the
FTP
client port.
a.
Select
System Settings
.
b.
Touch
Connectivity and Network Setup
.
c.
Select
Port Settings
.
d.
From the
Tools
tab screen, select
Network Settings
, then
Port Settings
.
e.
From the
Port Settings
screen, select
FTP Client
and then select
Change
Settings
.
f.
Select
Port Status
and then select
Change Settings
.
g.
Select
Enabled
then select
Save
.
h.
Select
Close
repeatedly until the
Tools
tab screen is displayed.
