Xerox WorkCentre 7232, Руководство системного администратора

Страница: 195 / 236

NetWare
Xerox WorkCentre 7232/7242 System Administration Guide 185
NetWare
This section explains what to do when problems occur while using NetWare. The
causes, confirmation methods, and actions are as follows.
When printing fails
For setting and confirmation methods, refer to the NetWare online documentation.
Cause Confirmation Method Action
A network component does
not conform to the automatic
setting of the frame type. Check that the data link port
light is on in the network
component connected to the
machine. Then check that
frame types of the file server
are unified in the network. Set the machine to the frame
type specified for the file
server to be connected.
A fault occurred on the
network between the client
and the machine. Use NWADMIN to check
whether the target printer
object is viewed. Replace the network cable
between the client and the
machine.
The user name or group
name of the print job is not
registered in the print queue. Use NWADMIN or
PCONSOLE to check
whether the user name or
group name of the job has
been registered in the print
queue. Re-send the print job to a
print queue in which the user
name or group name has
been registered correctly.
Use NWADMIN or
PCONSOLE to register a
user name or group name of
the job in the print queue.*
Print jobs cannot be sent to
the print queue. Use NWADMIN or
PCONSOLE to check
whether the Allow Users To
Submit Print Jobs option is
set to Yes.* Use NWADMIN or
PCONSOLE to set the Allow
Users to Submit Print Jobs to
Yes.*
The user name or group
name of the job is not defined
in the print server. Use NWADMIN or
PCONSOLE to check
whether the user name or
group name of the job is
registered in the target print
server.* Re-send the print job to a
print queue in which the user
name or group name has
been registered correctly.*
Use NWADMIN or
PCONSOLE to register the
user name or group name of
the job in the print server.*