Xerox WorkCentre 5325, Руководство пользователя

Страница: 186 / 222

Troubleshooting
WorkCentre 5300 Series Multifunction Printer
User Guide 186
Document Feeder Jams
Media Misfeeds
Probable Causes Solutions
Unsupported media of the wrong size,
thickness, or type is in use. Do not use unsupported media.
Use only Xerox-approved media. See
Supported Media on
page 51.
The documents loaded in the document feeder
exceed the maximum capacity allowed. Place fewer documents in the document feeder.
The document feeder guides are
improperly adjusted. Ensure the media guides fit snugly against the media
loaded in the document feeder.
Probable Causes Solutions
The media is not correctly positioned in the tray. Remove the misfed media and reposition the media
properly in the tray. Ensure that the media guides in the
tray are set correctly.
The number of sheets in the tray exceeds the
maximum capacity allowed. Remove the excess paper and load paper below the fill line.
The media guides are not correctly adjusted to
the media size. Adjust the media guides in the tray to match the size of
the media.
Warped or wrinkled media is loaded in the tray. Remove the media, smooth it out, and reload it. If it still
misfeeds, do not use that media.
The media is moist from humidity. Remove the moist media and replace it with new, dry media.
Unsupported media of the wrong size,
thickness, or type is in use. Do not use unsupported media.
Use Xerox-approved media. See
Supported Media on
page 51.
The label sheet is facing the wrong way in the tray. Load the label sheets according to the
manufacturer’s instructions.
Envelopes are facing the wrong way in Tray 5
(Bypass Tray). Load the envelopes facedown in Tray 5 (Bypass Tray) with
the flaps closed, on the leading edge.