manualshive.com logo in svg

Xerox WorkCentre 5222, Руководство системного администратора

Поделиться
Скачать
Xerox WorkCentre 5222 Скачать руководство пользователя страница 419

Fault Codes 

419

027-772

An error occurred during communication with the server. Use only ASCII 
characters for the host name in [Machine’s E-mail Address/Host Name]. For 
details, refer to 

Machine’s E-mail Address/Host Name on page 93. If the 

problem persists, check if the server supports the HELO command.

027-773

A timeout error occurred. Wait for a while, and try again.

027-774

The e-mail address contains unsupported characters. Use only ASCII 
characters for the address. 

027-775

Too many addresses were specified. Reduce the number of addresses.

027-776

An error occurred during communication with the server. Use only ASCII 
characters for the host name in [Machine’s E-mail Address/Host Name]. For 
details, refer to 

Machine’s E-mail Address/Host Name on page 93. If the 

problem persists, check if the server supports the EHLO command.

027-777

The server does not support SMTP-AUTH. In [SMTP Server Settings], set [E-
mail Send Authentication] to [Off].
For details, refer to 

SMTP Server Settings on page 96.

027-778

The server does not support SMTP-AUTH. Check the authentication types 
supported on the server. The machine supports the following authentication 
types: PLAIN (plain text), LOGIN (BASE64), and CRAM-MD5 (challenge-
response).

027-779

The SMTP authentication failed. Check the login name and password required 
for authentication.

027-796

The e-mail without an attachment was discarded. The machine is configured to 
print only e-mail attachments. To also have the machine print the body text and 
header of e-mail, change the settings on [Properties] in CentreWare Internet 
Services.

027-797

The output destination is not correct. Specify the correct destination, and resend 
the e-mail.

033-310

If the machine is equipped with two or more lines, the Fax Billing feature cannot 
be set to ON. Contact the Xerox Welcome Center to disable the Fax Billing 
feature, or to change the machine to the single-line configuration.

033-363

A fax error occurred. Switch off the machine, and then switch it on again. 
Contact the Xerox Welcome Center if the problem persists.

033-710

The document for polling has been deleted. Store the document again.

033-712

The memory is full. Delete unnecessary data.

033-713

A fax error occurred. Switch off the machine, and then switch it on again. 
Contact the Xerox Welcome Center if the problem persists.

033-716

The mailbox specified from the remote machine does not exist. Register the 
mailbox on the machine.

033-717

The mailbox passcode specified on the remote machine is incorrect. Notify the 
correct passcode.

033-718

There are no fax documents or no documents for polling in the mailbox specified 
on the remote machine. If required, store documents in the mailbox.

033-719

The fax job was cancelled when the machine was switched off and on. Send the 
document again.

Code

Description and Remedy

Содержание WorkCentre 5222







































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды