Xerox WorkCentre 5222 Скачать руководство пользователя страница 296

Страница: 296 / 454

11 Internet Fax

296

Internet Fax Environments

System Requirements

The following are required for the machine.

• The Fax Kit and the Internet Fax Kit

• The machine connected to the network using TCP/IP

• The environment allowing the sending and receiving of e-mails

NOTE:

A file may not be printed if the format differs from those in the above table.

Internet Fax Installation

This section describes how to enable the Internet Fax service.

Installation Procedure

To use the Internet Fax service, configure the following settings on the machine.

Network Communication Setup

Use the touch screen to set the following ports to [Enabled].

• Receive E-mail

• Send E-mail
Then, set the IP address.
Finally, set the other items required for the Internet Fax service.

Test Internet Fax

An Internet Fax job should be submitted to make sure that the machine has been
installed and configured correctly.

Item

Correspondent Specifications

ITU-T Recommendations

ITU-T T.37, T.30, F.185 and E.164

Internet Fax

format

Sending:
RFC2301 (TIFFprofileS/F/J) and 600 x 600
dpi
Receiving:
RFC2301 (TIFFprofileS/F/J/C)

Facsimile forwarding

RFC2304, RFC2305

DSN function

RFC1891, 1894

MDN function

RFC2298

SMTP receiving

RFC821, 822

POP3 receiving

RFC1939

MIME version

Version1.0 (RFC2049)

Содержание WorkCentre 5222







































































































































































































































































































































































































































































Результаты поиска

Содержание WorkCentre 5222

Отзывы:

Бренды по названию

Популярные бренды

Xerox WorkCentre 5222, Руководство системного администратора

Результаты поиска

Содержание WorkCentre 5222

Отзывы:

Бренды по названию

Популярные бренды