English
Xerox WorkCentre 3550
Quick Use Guide
15
Network Setup Using a Static IP Address
Before you begin, obtain the following information from your network
administrator:
•
IP Address
•
Gateway Address
•
Subnet Mask
•
DNS Server Address
Use the following instructions to enter a static IP Address:
1.
Press
Machine Status
on the control panel.
2.
Press the up/down arrows to highlight
Network Settings
and press
OK
.
3.
Enter the Administrator’s Password using the keypad. The default is
1111
.
Note:
You may have to press the
1
key several times to enter the ‘1’.
After entering a character press the
Right
arrow button to enable the
next character to be entered, or wait 2 seconds between presses.
Continue entering characters until the full password has been entered
and press
OK
.
4.
Press the up/down arrows to highlight
TCP/IPv4
and press
OK
.
5.
Press the up/down arrows to highlight
Static
and press
OK.
6.
Press the up/down arrows to highlight
IP Address
and press
OK
.
7.
Enter the IP Address using the keypad and press
OK
.
8.
Enter other parameters, such as the
Subnet Mask
and
Gateway
and
press
OK
.
If required, repeat the procedure and select the
DNS Server
option and
enter the DNS Server details.
9.
The static IP Address is now set. Press
Stop
to return to ready mode.
Содержание WorkCentre 3550
Страница 1: ...Xerox WorkCentre 3550 April 2010...
Страница 2: ...Xerox WorkCentre 3550 Quick Use Guide 2...
