manualshive.com logo in svg

Xerox WorkCenter Pro 215, Руководство пользователя

Поделиться
Скачать
Xerox WorkCenter Pro 215 Скачать руководство пользователя страница 24

17

Making Copies on the Automatic Document Feeder

The Automatic Document Feeder (ADF) allows you to automatically make single-sided or two-sided
copies.  The ADF holds up to 30 originals (20 lb/80 gsm).  Ensure originals are in good condition,
and that all staples and paper clips have been removed.  Use the document glass to make copies
from transparencies, facsimile paper, or originals having other unusual characteristics.  For reliable
copying operation, use originals within the following ranges:

Paper weight range:

16 to 24 lb/60 to 90 gsm

Paper size range:

5.5

×

8.5"/A5 (Short Edge feed only)

8.5

×

11"/A4 and 8.5

×

14"/216

×

353 mm

The ADF comes from the factory with the Auto Start feature disabled.  Refer to 

Customizing Your

Pro 215

 section of this User Guide for information about changing this setting.

1.  Select the required paper tray.

2.  Select the desired copy features from the control panel.

•

 

The maximum copy quantity is 100 for 1-sided output

and 1 for 2-sided output.  Reinsert the originals into the
ADF for multiple copies of 2-sided output.

3.  Adjust the paper guide to the original size.

Note:

  Writing that is very close to the leading or trailing

edge of the original may not copy.  Turning the original
around in the ADF may help.

4.  Insert up to 30 originals 

face up

 into the ADF until the

green ADF light on the copier diagram comes on.

Содержание WorkCenter Pro 215































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды