manualshive.com logo in svg

Xerox WorkCenter Pro 215, Руководство пользователя

Поделиться
Скачать
Xerox WorkCenter Pro 215 Скачать руководство пользователя страница 16

9

Installation 

(continued)

14.  Remove the starter toner cartridge from the silver bag.

Vigorously shake the cartridge to loosen the toner.

•

 

Thoroughly shaking the cartridge will assure maximum

copies per cartridge.

•

 

Xerox has included a Starter Toner Cartridge. This

cartridge will last approximately 2000 copies.
Purchased replacement toner cartridges will yield
approximately 7500 copies.

15.  Remove the toner cartridge cover.

16.  Slide the toner cartridge into the Pro 215 until it locks

into place.

17.  Close the front cover and the side cover.

Skip to the Printer Driver Software Installation section
in this User Guide to set up the Pro 215 for printing.

18.  Plug the power cord into the Pro 215 and then into a

grounded outlet.

19.  Turn on the power switch.  In approximately two

seconds the ready indicator will light.  The machine is
now ready to copy.

Содержание WorkCenter Pro 215































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды