11
Control Panel
10. Pro 215 Diagram:
Helps you locate areas that require your attention. The indicators will flash
in the area requiring attention. For additional information refer to the
Problem Solving
section.
11. Paper Supply Selection:
Press to change the selected paper supply. The selected paper
supply location will be indicated by a green light on the Pro 215 diagram.
12. ADF Misfeed Indicator:
This indicator will light when a misfeed occurs in the ADF.
13. On-line/Off-line Key:
Press this button to alternate between On-line and Off-line status.
When the light is lit, the printer is On-line.
14. Data LED:
This LED indicates the processing of electronic data in the Pro 215 PCL Controller.
The LED is ON when the Pro 215 is printing documents. The LED is OFF when no data is
present. The LED is blinking when the Pro 215 is receiving data sent to the printer.
15. Ready Indicator:
When the light is ON (not flashing), the Pro 215 is ready to make copies.
When the light is flashing after the Start key is pressed, the Pro 215 is warming up and the
copy cycle will begin automatically.
16. Start:
Press this key to begin copying.
•
The display will change to 1 and increases by 1 as each copy is made.
17. Clear/Stop:
Press this key to stop the Pro 215 while making copies or to clear copy quantity.
If the key is pressed twice quickly, all programming will be cleared.
Содержание WorkCenter Pro 215
Страница 1: ...33223 User Guide WorkCentre Pro 215 ...
