Xerox Work Centre 7970, Руководство по ожиданиям клиентов и установке

Страница: 19 / 29

Installation WorkCentre
®
7970 Series
Customer Expectation and Installation Guide 16
4. Installation
Roles and Responsibilities
This section is key to clearly state Xerox and the customer roles and responsibilities and necessary actions.
Responsibility Matrix
Action Customer Xerox
Ensure adequate space and power to configure the WorkCentre 7970/7970i X
Unpack system / components X
Install system hardware (excluding envelope Tray) X
Install Envelope Tray X
Connect all System Components prior to powering up the system X
Ensure network configuration X
Confirm network integrity X
Acquire and install client software including print drivers X
Configure Workflow Scanning X
Run initial software diagnostics when directed X
Monitor and adjust as required X
Load any additional fonts X
Procure BNC transceiver for network connection (if needed) X
Order and replace SMart Kits (Drum cartridges, Second Bias Transfer Roll,
transfer belt cleaner, and Waste Toner Cartridge, etc.) as needed.
X
Provide Help Line support X
Provide spared parts X
Provide service X
Primary customer WorkCentre 7970/7970i applications:
_________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________
Special considerations or performance limitations identified by Xerox and agreed to by the customer:
_________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________