manualshive.com logo in svg

Xerox Wide Format 6604, Руководство пользователя, Страница: 54 / 208

Поделиться
Скачать
Xerox Wide Format 6604 Скачать руководство пользователя страница 54

2. If you enter an incorrect value, press the C button to clear the entry and then enter

the correct value.

Step 3: Copying the Original

The Scanner has a fixed timer between seeing the document and starting the document
load action. Therefore, it is essential that you follow the details below paying close
attention to the orientation and timing as you load the original. Improperly loading the
original may cause misfeed and skewed images.
1. Align the original (image face up) with the Left Justified ruling on the Feed-in Shelf.

Do not load the original beyond the “no paper zone” as this is where the Drive Gears
are located and may cause a jam. Hold the origina both hands and quickly slide it
into the Scanner until it stops. Do not let go. The motor will start as the document is
detected. Once the Scanner detects the original, it prefeeds in and out, in again and
completes the scan and exits just below the scanner.
If the document does not feed automatically, the Scan Start mode may be set to
Use Start Key. In this case, press the Start button on the Control Panel. For more
information refer to System Administration, Set Start Scan mode.

2. If there are Document Catch Guides in the front of the machine, you may wish to

guide the lead edge of the documents as they travel downward into the guides.

Refer to Making Copies using the Manual Feed-in Shelf (Bypass)next in this chapter
for more details and options available.

Xerox

®

 Wide Format 6604/6605 Solution

™

2-6

User Guide

Printing and Copying Documents

Содержание Wide Format 6604

















































































































































































































Отзывы:

Нет отзывов