Xerox Wide Format 6604 Скачать руководство пользователя страница 187

Страница: 187 / 208

Remedy

Check

Symptoms

Clean the Main Roller. Refer to Cleaning
the Machine.

Is the Main Roller soiled?

The scanned
image contains
gray bars outside
of the document
size.

Clean the Main Roller. Refer to Cleaning
the Machine, for cleaning the Scanner
instructions.

Does the Main Roller have Pinch
Roller marks/stripes?

Gray marks show
up in the scanned
image as stripes.

Adjust the scan density.

Is the scan density set to
Darken?

The scanned
image is too dark.

Rotate the document 90 degrees.

Adjust the scan density.

Is the density of the document
too light?

The scanned
image is too light.

Is the scan density set to
Lighten?

Select the correct original type.
Refer to Original type.

Is the original type setting
correct?

Rotate the document 90 degrees.

Load the document correctly.
Refer to Scanning the Document for
details on Scanner behavior.

Was the document loaded
correctly in the Scanner?

The scanned
images are
skewed.

Load the document correctly.
Refer to Scanning the Document.

Was the document loaded
correctly in the Scanner?

Part of the
document image
is not present on
the scanned
image.

Correctly configure these settings.

Are the scan feature settings
copy density, media supply,
margins, and scan offset
correct?

Rotate the document 90 degrees.

Adjust the scan density and original type
settings.
Refer to Original Type.

Is the document pasted
together or folded in?

The scanned
image has
shadows.

Is the document made of highly
transparent material?

Select a higher resolution.
Refer to Scan Resolution.

Is the scan resolution set too
low?

The scanned
image is coarse.

Select the correct rendering setting.
Refer to Rendering.

Did you select the correct
rendering setting?

8-9

Xerox

Wide Format 6604/6605 Solution

™

User Guide

Problem Solving

Содержание Wide Format 6604

















































































































































































































Результаты поиска

Содержание Wide Format 6604

Отзывы:

Xerox Wide Format 6604, Руководство пользователя, Страница: 187 / 208

Результаты поиска

Содержание Wide Format 6604

Отзывы: