Xerox Wide Format 6604 Скачать руководство пользователя страница 186

Страница: 186 / 208

Remedy

Check

Symptoms

Adjust the copy density and original type
settings.
Refer to Copy Density and Original Type.

Is the document pasted
together or folded in?

The copy has
shadows.

Is the document made of highly
transparent material?

Problems During Scanning

The following helps you solve problems encountered during scanning.

To learn about scan features, click on Help in the scan driver screen and refer to the
network scan driver's online help.

Remedy

Check

Symptoms

The minimum size document that can be
fed is approximately 114 mm/4.5 inches
wide by 200 mm/4.5 inches long.
Refer to Document Input.

Is the document too small?

Document doesn’t
feed into the
Scanner.

Correctly scan the correct type of
document.
Refer to Document Input and Scanning
the Document.

Is the correct type of document
used?

Document jams
often.

Flatten out the curl and scan the
document again.

Is the document curled?

A corner of the
document is
folded.

Correctly load the document.
Refer to Scanning the Document

Was the document inserted in
the correct position?

Scanning is not
made at the
desired size.

Straighten and correctly rescan the
document.
Refer to Scanning the Document.

Is the document folded or
bent?

Perform the normalization procedure to
correct auto width detection problems.

Is the problem the width of the
image size?

Clean the scanning area.
Refer to Cleaning the Machine.

Have you cleaned the Scanner
areas as a daily maintenance
task?

The scanned
image is dirty.

Adjust the scan density, image quality, or
background suppression.
Refer to Original Type, and White Point
sections for details.

Is the document printed on
colored media, rough media, or
blueprint media?

Clean the scanning area.
Refer to Cleaning the Machine scanner
portion.

Have you cleaned the Scanner
areas as a daily maintenance
task?

The scanned
image has black
lines.

Xerox

Wide Format 6604/6605 Solution

™

8-8

User Guide

Problem Solving

Содержание Wide Format 6604

















































































































































































































Результаты поиска

Содержание Wide Format 6604

Отзывы:

Xerox Wide Format 6604, Руководство пользователя, Страница: 186 / 208

Результаты поиска

Содержание Wide Format 6604

Отзывы: