Xerox Versant 80 Press Скачать руководство пользователя страница 200

Страница: 200 / 382

3. If the document is not caught in the entry of the document feeder, then remove it.

4. If instructed to open the inner cover, lift up the lever, and open the inner cover.

Remove the jammed document.

Note

If the document is stuck, do not pull on it forcefully, as this could damage the
document.

5. If the jam is inside of the left cover, remove the jammed document.

6. Close the following open covers until they click into place. Close them in the following

order:

• Inner cover
• Top cover
• Left cover

7. If a document jam cannot be found, slowly raise the document feeder, and if the

document is there, remove it.

8. Close the document feeder.
9. If indicated, raise the feeder tray area and remove the document.

10. Gently return the feeder tray to its original position.

Xerox

Versant

80 Press

14-38

User Guide

Press Problem Solving

Содержание Versant 80 Press































































































































































































































































































































































































Результаты поиска

Содержание Versant 80 Press

Отзывы:

Похожие инструкции для Versant 80 Press

Бренды по названию

Популярные бренды

Xerox Versant 80 Press, Руководство пользователя

Результаты поиска

Содержание Versant 80 Press

Отзывы:

Похожие инструкции для Versant 80 Press

Бренды по названию

Популярные бренды