manualshive.com logo in svg

Xerox Versant 2100 Press, Руководство по ожиданиям клиентов и установке, Страница: 39 / 49

Поделиться
Скачать
Xerox Versant 2100 Press Скачать руководство пользователя страница 39

Installation

 

 

 

 

 

 

 

 

 

 

 

Xerox

®  

Versant™ 2100 Press 

 

Customer Expectation and Installation Guide   

Xerox Confidential 

 

34 

Floor Information 

 

Floor Specifications 

The installation site floor must meet certain specifications and 
requirements before the system is installed: 

 

The customer must ensure and approve the floor composition and 

strength. 

 

The surface of the floor should be a hard, non-compressible surface such 
as bare concrete, wood, or industrial grade floor tile. If the surface is 

compressible/covered (for example, carpets or non-industrial tile), the 
covering should be removed under the press. 

 

Mobility (floor) plates are required for any installation occurring on 

carpeting. 

 

Additionally, mobility assist devices (supplied by the customer), such as 

masonite or plywood, must be used for installations occurring on 
ceramic tiles, uneven floors (which meet required specifications), or 
carpeting. The mobility assist devices will ensure that the flooring is not 
damaged during the installation process. 

 

Floor Requirements

 

The following table lists the floor readiness activities and the person 
responsible for completing that activity. 
 

Activity 

Responsible Person 

Certify the floor strength from the loading dock 
to the installation site 

Customer (and 
structural engineer) 

Certify the floor strength and composition for 
the installation site 

Customer (and 
structural engineer) 

Certify or remove floor covering under press 
location (if applicable) 

Customer (and 
structural engineer) 

 

Floor Strength Information 

As part of the structural inspection process, a structural engineer should 
inspect and approve the site where the system will be installed. 

 

The customer site floor must safely support the weight of the entire press  
and all its components. This includes the weight of all optional feeding and 
finishing devices that the customer intends to add. Therefore, the 
structural engineer and customer must evaluate and calculate the weight of 
all the modules and optional accessories (including any third-party 
finishing devices) in order to accurately determine the appropriate floor 
strength and weight distribution needed at the installation site. 

 

For product specification information on all third-party finishing devices, 
refer to the specific third-party customer documentation. 
 

Floor Worksheets 

 

Floors/Floor Coverings Worksheet 

Are the floors or floor coverings along the delivery route concrete or 
industrial tile? 

 Yes   

 No 

 
If No: Customer  must supply Carriers  with  hardboard/plywood or metal 
plates/Masonite  for  rolling the press over the floors that are not concrete 
or industrial tile. 
 

Raised Floors Worksheet 

Are there any raised floors on the delivery route? 

 Yes   

 No 

 

If Yes: Has a structural engineer or the customer signed off/approved that 
the floors meet requirements? 

 Yes   

 No 

 

If No: Sign off/Approval is required. 

 

NOTE: 

Carriers MUST lift all the raised-floor tiles on the route to ensure 

the support structure integrity. 

NOTE: 

Carriers will use hardboard or metal plates (such as masonite or 

plywood) when rolling the press over the raised floor. 

 

Floor Strength/Load Worksheet 

Has a structural engineer or the customer signed off/approved that the 
floor meets requirements? 

 Yes   

 No 

 
If No: Sign off/Approval is required. 

 

Is the floor of the pathway route and destination area able to hold the 
combined weight of the press left and right modules (1,248 lb./566.1 kg)? 

 Yes   

 No 

 
If No: An alternative route/destination site must be considered. 
 

Mobility Plate Information 

 

Mobility Plates 

 

All 

installations occurring on carpeted flooring surfaces require the 

installation of a mobility plate to allow the product to be moved during 
normal maintenance. 

 

Mobility plates are available from your Sales Representative. 

 

Mobility Plate Kit 

Part number: 497K5270 is the only mobility plate kit that is available for 
the press and its optional feeding/finishing devices. The kit includes the 
following contents: 

 

1  Plate 

 

4 Bracket assemblies 

 

8 Nuts 

 

1 set of kit instructions  

 
Each plate is: 

 

19.68 in./500 mm (width) x 29.52 in./750 mm (depth) 

 

0.12 in./3 mm (thickness) 

 

19 lb./8.6 kg 

 

Optional kits must be ordered for any optional feeding/finishing devices 
that are attached to the press. Refer to the next section in this guide for 
specific information on each feeding/finishing device. 

 
Mobility Plate Charts 

The following tables show the number of mobility plates required for the 
base configuration and for the various optional feeding and finishing 
devices. 
 

Base Configuration 

Module name 

Required number of kits 

Press (Advance HFC + Left and Right 

modules)  

5 kits (3 for the left and right 

modules and; 2 for the 
Advanced HCF) 

 

Optional Devices Chart

 

The following table lists the number of ADDITIONAL plates required 
for the various optional devices. The number of plates listed does not 
include the base press (left and right modules and Advanced HCF). 

 

NOTE: 

The Interface Module is required with any system configuration that 

has one or more finishing device, except the Offset Catch Tray (OCT). 
 

 

Содержание Versant 2100 Press


















































Отзывы:

Нет отзывов