manualshive.com logo in svg

Xerox Versant 2100 Press, Руководство по ожиданиям клиентов и установке, Страница: 27 / 49

Поделиться
Скачать
Xerox Versant 2100 Press Скачать руководство пользователя страница 27

Detailed Specifications

 

 

 

 

 

 

 

 

 

 

Xerox

®  

Versant™ 2100 Press 

 

Customer Expectation and Installation Guide   

Xerox Confidential 

 

22 

Interposer 

The Standard Finisher Plus includes a standard Interposer, used to insert pre-printed stock into finished sets without having to go through the print engine. Labels, 
coated media and envelopes are not supported.  
The Interposer is also called the Post-Process Inserter, and depending on the product, it is either Tray T1 or Tray 8. 

 

NOTE: 

These specifications are the same as the Standard Finisher. 

Interposer Capacity by weight and paper finish 

Paper type and weight 

Paper Size 

B5 / 8 x 10 in. 

A4 / 8.5 x 11 in. 

B4 / 8.5 x 14 in. 

A3 / 11 x 17 in. 

Uncoated 

52-80 gsm 

200 shts 

200 shts 

200 shts 

200 shts 

81-220 gsm 

H=22mm (0.87 in) 

H=22mm (0.87 in) 

H=22mm (0.87 in) 

H=22mm (0.87 in) 

 
Hole Punching 

The Standard Finisher Plus offers Hole Punching as a standard feature. 

 

Holes are created on the trail edge of the sheet. 

 

Hole punching is not available to the Booklet Tray. 

 

Hole punch capacity is equal to the regular capacity of the chosen output tray  

 

For the USA, 2- and 3-hole punching is available; for Europe, 2- and 4- hole punch is available. Stacks can be punched on the left or right side, or on the top 
edge 

 

NOTE: 

These specifications are the same as the Standard Finisher. 

 

Hole Punch Capacity by weight and paper finish 

Paper type and weight 

Paper Size 

B5 

A4 / .5 x 11 in. 

B4 / 8.5 x 14 in. 

A3 / 11 x 17 in. 

Uncoated 52-220 

gsm 

Applicable 

Applicable 

Applicable Applicable 

Coated 106-220 

gsm  Applicable 

Applicable 

Applicable Applicable 

Supported Stocks for the Finishing 
Transport 

When delivering sheets to a connected third-party finishing device, the Standard Finisher Plus can pass through 
substrate sizes from 182 mm (7.16 in.) to 488 mm 
(19.2 in.) in the process direction, and 182 mm (7.16 in.) to 330.2 mm (13 in.) in the cross-process direction, substrate 
weights from 55-350 gsm (16 lb. Bond-130 lb. Cover). 

Standard Finisher Plus Limitations  

Productivity may be reduced by up to 50% when running multiple sets of a single sheet job to the Stack Tray, due to 
the press being forced to wait while each single sheet set is ejected to the Stacker Tray. 

 

2-Knife Trimmer Module

 

The 2-Knife Trimmer is an optional finishing device that provides full-bleed trim for square fold booklets. 

IMPORTANT: 

It is only available with the Booklet Maker Finisher with the SquareFold Trimmer; it is not available with any other finishing device. 

For information related to the 2-Knife Trimmer Module, refer to Module Dimensions for Optional Devices and Electrical Requirements for Optional Devices. 

2-Knife Trimmer 

Specifications

 

Feature 

Specification (with centerline paper) 

Paper Types and Weights 

Coated and Uncoated  

Paper weights:  18 lb. Bond – - 110 lb. Cover (64 gsm – 300 gsm) 
Cover weights:  45lb Cover – 110 lb Cover (120 gsm – 300 gsm) 

Paper Size 

Minimum: 8.5 x 11 in. SEF (216 mm x 279 mm) 
Maximum: 13 x 18 in. SEF (330 mm x 457 mm) 

Trim Capacity 

5—20 sheet booklet at 24 lb (90 gsm) 

5—20 sheet booklet at 20 lb (80 gsm) 

Trim Dimensions 

1/16” – 1 3/8” (2 – 35 mm) at 0.1 mm increments 

2-Knife Trimmer Limitations 

When clearing a fault on the 2-Knife Trimmer, the SquareFold Trimmer will also need to be reset.  The SquareFold Trimmer 
can be reset by opening and closing the waste bin. 
Always empty the waste bin for both the 2-Knife Trimmer and SquareFold Trimmer at the same time. 
The 2-Knife Trimmer can handle cover paper as low as 60 gsm, for best results, 120 gsm to 300 gsm is recommended. 

 

Third-Party Finishing Options

 

Third-Party Finishing devices that can be connected to the Standard Finisher Plus include: 

 

Plockmatic Pro 35/50 Booklet Maker 

 

Horizon ColorWorks PRO 

 
Specifications and expectations for these devices are available in a Solutions Planning Guide which is available from your Xerox sales representative or analyst. For 
Xerox personnel, information may be found at 

http://xww.thefic.xerox.com/View/Collection-113169

 or at 

https://s3s.smartcentre.xerox.com/Products-and-

Services/Production/Workflow/Feeding---Finishing/Plockmatic-Pro-50/35/

 

 

 

 

Содержание Versant 2100 Press


















































Отзывы:

Нет отзывов