System Settings
Phaser® 8510/8560MFP Multifunction Product
4-5
Controlling Startup Page Printing
The system can produce a Startup page each time the system is turned on or reset. The factory
default is
On
. You can print the Startup page at any time from the
Information Pages
menu.
To turn on/off automatic printing of the Startup page, use one of the following options:
■
The system’s control panel
■
CentreWare IS
Using the Control Panel
To turn on/off automatic printing of the Startup page on the control panel:
1.
Press the
System
button.
2.
Select
General Setup
, and then press the
OK
button.
3.
Select
System Controls
, and then press the
OK
button.
The
Startup Page
is highlighted. The setting (
On
or
Off
) is displayed.
4.
Press the
OK
button to change the setting.
Using CentreWare IS
To turn on/off the automatic printing of the Startup page using CentreWare IS:
1.
Launch your web browser.
2.
Enter your system’s IP address in the browser’s
Address
field (http://xxx.xxx.xxx.xxx).
3.
Click
Properties
.
4.
Select the
General
folder on the left sidebar.
5.
Select
System Defaults
.
6.
Select
Off
or
On
from the
Startup Page
drop-down list to change the setting.
7.
Click the
Save Changes
button at the bottom of the page.
Printing the Startup Page from the Control Panel
To print the Startup page on the control panel:
1.
Press the
System
button.
2.
Select
Information
, and then press the
OK
button.
3.
Select
Information Pages
, and then press the
OK
button.
4.
Select
Startup Page
, and then press the
OK
button to print.
Note:
You can also print the Startup page from the
Troubleshooting
tab of the Windows
printer driver.
