Xerox Phaser 860 Скачать руководство пользователя страница 82

Страница: 82 / 108

Phaser 860 Color Printer

Moving and Shipping the Printer

Moving the printer within the office

Close all of the printer’s doors and covers.

Turn off the printer using the power switch located on the rear
panel.

Immediately use the front panel to scroll down to

Shut Down for

Moving Printer

and press the

key before the front panel goes

blank; (you only have 4 seconds).

Wait for the printer to complete its cool-down period, during
which the ink solidifies, making the printer safe to move. This
takes at least 20 minutes with the fan running.

Note

If you did not select

Shut Down for Moving Printer

, wait at

least 30 minutes before moving the printer to ensure the
printer is safe to move.

After the ink has cooled, unplug the printer.

Remove the upper paper tray to provide a place for your hands
when lifting the printer.

Note

Always move the printer separately from its High-Capacity
Paper Tray Assembly.

0726-80

Содержание Phaser 860













































































































Результаты поиска

Содержание Phaser 860

Отзывы:

Похожие инструкции для Phaser 860

Бренды по названию

Популярные бренды

Xerox Phaser 860, Руководство пользователя

Результаты поиска

Содержание Phaser 860

Отзывы:

Похожие инструкции для Phaser 860

Бренды по названию

Популярные бренды