Printer Settings
Phaser® 7760 Color Laser Printer
4-9
Paper Handling Settings
This section includes:
■
Selecting Tray 1 (MPT) Mode
on page 4-9
■
Setting the Duration for the Tray 1 (MPT) Prompt
on page 4-11
■
Setting the Duration for the Tray 2–5 Prompt
on page 4-12
■
Changing the Load Paper Timeout
on page 4-13
■
Setting the Default Paper Destination
on page 4-14
■
Selecting the Default for Offsetting Output
on page 4-15
■
Setting the Default Stapling Option
on page 4-16
■
Setting the Default Punch Option
on page 4-17
Selecting Tray 1 (MPT) Mode
The Tray 1 (MPT) Mode setting specifies:
■
How Tray 1 (MPT) paper type and size are determined when you load paper in the tray but
do not select the paper type and size on the control panel.
■
When Tray 1 (MPT) is used for print jobs.
To select the Tray 1 (MPT) mode setting, use one of the following options:
■
The printer’s control panel
■
CentreWare IS
Setting
Description
Dynamic
(Factory default setting)
■
Uses the settings from the next print job that prints from Tray 1 (MPT)
to determine the paper size and type.
■
Printer will print from Tray 1 (MPT) when specified in the print job or
when no other tray has the job's requested paper size and type.
Static
■
The paper size and type already set for Tray 1 (MPT) stay in effect.
■
Printer will print from Tray 1 (MPT) when specified in the print job or
when no other tray has the job's requested paper size and type.
Automatic
■
Uses the settings from the next print job that prints from Tray 1 (MPT)
to determine the paper size and type.
■
Printer will print from Tray 1 (MPT) when paper is loaded, unless a
different tray is specified in the printer driver.
