Security Features
Phaser 7500 Color Printer
System Administrator Guide
57
•
Privacy Protocol
: The protocol associated with the Privacy Key; selected on the
Configure SNMP
v3: Key User Account
page.
•
Privacy Key
: The privacy key defined on the
Configure SNMP v3: Administrative User Account
page is displayed as a row of asterisks (*) here.
•
MIB Access
: The Key User account’s MIB access permissions selected on the
Configure SNMP v3:
Key User Account
page. MIB access for the Key User account can be set to
Read
or
Read/Write.
Note:
SNMP Read and SNMP Write access for the Any User account must be equal to or less than
the read and write access privileges set for the Key User account. Once the Key User account is
created, if the Any User account is set to have read and/or write access, but the Key User account
access is not set, the Key User account is set with the same access privileges as the Any User
account by default. Similarly, if the Key User account does not have SNMP Write access, the Any
User account cannot be set with write access.
The Any User/Driver Account Settings
•
User Name
: Displays
anyuser
by default and cannot be changed.
•
MIB Access
: Displays the Any User account’s MIB access permissions selected on the
Configure
SNMP v3: Other Account Settings
page. This can be set to
Read
or
Read/Write
.
•
SNMP Read
: Displays a check symbol if SNMP Read access is enabled. SNMP Read access can be
enabled for the Any User account after the Key User account is created.
•
SNMP Write
: Displays a check symbol if SNMP Write access is enabled. SNMP Write access can be
enabled for the Any User account after the Key User account is created.
•
Driver Account Enabled
: Displays a check symbol if the
Driver Account
is enabled (default).
Note:
If the
Driver Account
is disabled, it breaks communication between the printer and any
applications using SNMP v3, such as Xerox printer drivers and PrintingScout. For a complete list of
applications disabled, see
Disabling SNMP
on page 58.
Configuring the SNMP Access Control List
To set up a list of hosts that are authorized to access the printer using SNMP:
1.
Launch your Web browser.
2.
Enter your printer’s IP address in the browser
Address
field. For details, see
Finding the Printer’s IP
Address
on page 14.
3.
Click
Properties
.
4.
On the left navigation pane, select the
Protocol
folder.
5.
Select
SNMP
.
6.
If prompted, enter your Admin or Key User name and password.
7.
Enter up to 10 host IP addresses in the
Host Access List
field of the
SNMP Access Control List
box. Separate entries with a blank or a comma, specify ranges with a hyphen (-), and use an
asterisk (*) to represent a group of numbers (e.g., 13.62.156.*).
8.
Click the
Save Changes
button.
See also:
Access Control Lists
on page 40
