Output Trays
Phaser® 7300 Color Printer
27
Offsetting output
When you send output to the Top Output Tray, you can also select offsetting. Offsetting separates print
jobs or collated sets of a single job by approximately 24 mm (.8 in.) in the output tray.
Note
If you send output to the Left Side Output Tray, the printer does not offset the output.
You must have a hard drive to have the printer offset collated sets.
You can switch job offsetting on or off on the front panel:
1.
With
Menus
highlighted, press the
OK
key.
2.
Scroll to
Printer Setup Menu
using the
Up Arrow
or
Down Arrow
key and press
OK
.
3.
Scroll to
Job Defaults Menu
and press the
OK
key.
4.
Scroll to
Job Offset
.
5.
Select either
On
or
Off
by pressing the
OK
key.
Note
If you change job offsetting in your printer driver, this overrides the front panel setting for
your print jobs.
