Trays
Phaser® 7300 Color Printer
10
When you use standard size paper in Tray 1 and adjust the guides for that paper, you don’t need to
specify the paper size in the front panel. Tray 1 contains size sensors that automatically inform the
printer about the paper size. However, when you insert custom size paper in the tray and change
Custom Size
to
On
, the size sensors are turned off and you must enter the X and Y values as
described in Step 4. If you later insert standard size paper in the tray, you must turn on the tray sensors
again by changing
Custom Size
to
Off
:
1.
On the front panel, with
Menus
highlighted, press the
OK
key.
2.
Scroll to
Printer Setup Menu
(by pressing the
Down Arrow
key) and press the
OK
key.
3.
Scroll to
Tray Setup Menu
and press the
OK
key.
4.
Scroll to
Tray # Setup Menu
(where # is the number of the tray) and press the
OK
key.
5.
If you see a selection for
Set Custom X
, scroll to
Custom Size
and press the
OK
key to
change
Custom Size
to
Off
. This reactivates the tray sensors for that tray.
