Trays
Phaser® 7300 Color Printer
5
4.
Insert a stack of paper into the tray. Depending on the size and type of paper, load the paper
long-edge feed or short-edge feed. For information on custom size paper, refer to page 8.
5.
Slide the tray back into the printer and turn to the front panel.
6.
When the front panel prompts you:
■
If you haven’t changed the type of paper, press the
OK
key to accept the current setting for
paper type.
■
If you have changed the type of paper, scroll to the correct paper type and press the
OK
key
to save your selection.
Note
To avoid possible print-quality and paper-feed problems, make sure that the tray’s paper type
setting matches the loaded paper type.
Long-edge feed
Short-edge feed
■
Use for the following sizes: Letter, A4, and
B5 JIS.
■
Use for transparencies (in Tray 1 only).
Transparencies should NOT be loaded in
Trays 2 - 5.
■
Place the side to be printed
facedown
with the top
of the page at the
back
of the tray.
■
Prepunched holes should be on your
right
as you
face the printer.
■
Use for the following sizes: Legal, Tabloid
(11 x 17 in.), Tabloid Extra (12 x 18 in.),
Executive, US Folio, A3, SRA3, A5, A6, and
B4 JIS.
■
Place the side to be printed
facedown
with the top
of the page on your
right
as you face the printer.
■
Prepunched holes should be towards the
front
of
the tray.
7300-38
PHASER
7300
7300-39
PHASER
7300
OK
6200-45
