Xerox PHASER 6130, Руководство по обслуживанию

Страница: 197 / 454

Phaser 6130 Color Laser Printer Service Manual 4-13
General Troubleshooting
Initialize Slave Initialize Slave
■
Initialize Slave OK?
■
Processing
■
Initialized
■
Please wait
<Press the Set button to
run Slave Initialization>
<Press the Cancel button
to move one level up the
menu>
Initializes Slave.
Print NVM Info Print NVM Info
■
Processing
■
Please wait
<Press the Set button to
run the test>
<Press the Cancel button
to move one level up the
menu>
Prints NVRAM information saved in the
Controller.
Print Info Provides printer configurations and settings information.
Info Page Info Page
■
Ready
■
Processing
Prints the software version of the
printer controller. Use this function to
verify the printer configuration. The
Configuration Page contains:
■
Engine installation unit information
■
Standard Tray
■
Optional Tray (displaying version)
■
Optional Duplex Unit (displaying
version)
■
Engine ROM Revision No.
■
MCU NVM Revision No.
Print Settings Print Settings
■
Ready
■
Processing
Prints the configured settings through
the Control Panel.
The Print Settings page contains:
■
Serial No.
■
HexDump On/Off Information
■
Tone Correction On/Off Information
■
Color Print Count
■
B/W Print Count
■
Total Print Count
■
Color Backup Count
■
B/W Backup Count
■
Total Backup Count
■
Color Error Count
■
B/W Error Count
Installation Provides printer installation information.
Serial No. SerialNo.
■
HATxxxxxx
or
■
HARxxxxxx
Displays the 6 digit Serial Number.
Note: This information is not initialized
with any key action.
Test Control Panel Display Test Description