Xerox PHASER 6130, Руководство по обслуживанию

Страница: 196 / 454

4-12 Phaser 6130 Color Laser Printer Service Manual
General Troubleshooting
Drum Erase
Lamp K Drum Erase Lamp K Tests the black Erase Lamp.
Drum Erase
Lamp YMC Drum Erase Lamp YMC Tests the yellow, magenta, and cyan
Erase Lamps.
NVM Settings Edits, saves, loads, and prints NVRAM information.
Edit NVM Edit NVM
■
Ad0000=00000000*
■
Please wait
<Press the Left or Right
button to move the
cursor>
<Press the Up or Down
button to change the
value at the cursor>
<Press the Set button to
save the value in Engine
NVM>
<Press the Cancel button
to move one level up the
menu>
Displays the current NVRAM value.
Use this function to edit NVRAM
information.
Save NVM to
ESS Save NVM
■
SaveNVM MCU -> ESS
OK?
■
Saved
■
Please wait
<Press the Set button to
save the value in the
Controller NVM>
<Press the Cancel button
to move one level up the
menu>
Saves the NVRAM information of the
Engine in the Controller. NVRAM
addresses to be saved are as follows:
1000-10FF, Total: 256Byte
Note: Information saved in the
Controller NVM can be initialized using
Clear All NVM .
Load NVM from
ESS Load NVM
■
LoadNVM MCU -> ESS
OK?
■
Processing
■
Loaded
■
Please wait
<Press the Set button to
load the value saved in
the Controller NVM to the
Engine>
<Press the Cancel button
to move one level up the
menu>
Loads NVRAM information of the
Engine saved in the Controller into the
Engine.
1000-10FF / 1100-11FF / 1200-12FF
Note: Information saved in the
Controller NVM can be initialized using
Clear All NVM .
Test Control Panel Display Test Description