
Maintenance
Xerox
®
Phaser
®
6022 Printer
93
User Guide
Refreshing the Toner
Toner Refresh recalibrates toner concentration and developer voltages. If you print documents with high
or low ink coverage, Toner Refresh can optimize print quality.
To refresh the toner:
1.
At the printer control panel, press the Menu button.
2.
Use the Up and Down arrows to navigate to Admin Menu, then press
OK
.
3.
Navigate to the
Maintenance Menu
, then press
OK
.
4.
Select
Toner Refresh
, then press
OK
.
5.
To select the toner to refresh, press the arrow buttons, then press
OK
.
6.
Select
Yes
, then press
OK
.
The process runs automatically. Wait three minutes for the process to complete and the printer to
return to Ready.
Note:
Do not use this procedure repeatedly. Running the procedure repeatedly uses the toner supply
more quickly.
Cleaning the Developer
The Clean Developer feature runs the developer motor and stirs the toner in the toner cartridge. Use
Clean Developer to clean toner from a cartridge just before changing it or to refresh the toner after
replacing a toner cartridge.
To clean the developer:
1.
At the printer control panel, press the Menu button.
2.
Use the Up and Down arrows to navigate to Admin Menu, then press
OK
.
3.
Navigate to the
Maintenance Menu
, then press
OK
.
4.
Navigate to
Clean Developer
, then press
OK
.
5.
At the
Are you sure?
prompt, to select
Yes
, press the arrow buttons.
6.
Press
OK
.
The process runs automatically. Wait three minutes for the process to complete and the printer to
return to Ready.
Recycling Supplies
For more information on the Xerox
®
supplies recycling program, go to:
www.xerox.com/gwa
.