Installation and Setup
44
Xerox
®
Phaser
®
6022 Printer
User Guide
Assigning the Printer IP Address
This section includes:
•
Assigning the IP Address Automatically .................................................................................................................... 44
•
Assigning the IP Address Manually .............................................................................................................................. 45
•
Changing the IP Address Using CentreWare Internet Services ....................................................................... 46
•
Changing the IP Address Using the Installer with USB ....................................................................................... 47
By default, the printer is set to acquire an IP address from the network server using DHCP. Network
addresses assigned by DHCP are temporary, however. After a specified time, the network could assign a
new IP address to the printer. If the print driver is set to an IP address that changes periodically, you can
experience connectivity issues. To avoid problems, or if your network administrator requires a static IP
address for the printer, you can assign the IP address to the printer.
Note:
You can view the IP address of your printer on the control panel or on the Configuration
Report. For details, see
Printing the Configuration Report
on page 43.
See also:
Assigning the IP Address Manually
on page 45
Finding the IP Address of Your Printer
on page 25
Assigning the IP Address Automatically
1.
At the printer control panel, press the Menu button.
2.
To select
Admin Menu
, press the arrow buttons, then press
OK
.
3.
Navigate to Network, then press
OK
.
4.
To select
TCP/IP
, press the
Down
Arrow button, then press
OK
.
5.
Select an IPv4 mode, then press
OK
.
6.
At
Get IP Address
, press
OK
.
7.
Navigate to
DHCP/AutoIP
, then press
OK
.
8.
To return to the Ready screen, press
Return
.