Printer Settings
Phaser® 5500 Laser Printer
1-18
Using the Front Panel
To specify the tray sequence:
1.
At the printer’s front panel, select
Printer Setup
, then press the
OK
button.
2.
Select
Paper Handling Setup
, then press the
OK
button.
3.
Select
Tray Sequence
, then press the
OK
button.
4.
Scroll to the desired tray sequence. (If you want to turn off tray switching, select
Off
.)
5.
Press the
OK
button to save the changes.
Using CentreWare IS
To specify the tray sequence:
1.
Launch your web browser.
2.
Enter your printer’s IP address in the browser’s
Address
field (http://xxx.xxx.xxx.xxx).
3.
Select
Properties
.
4.
Select the
General
folder on the left sidebar.
5.
Select
Printer Defaults
.
6.
Select the desired tray sequence from the
Tray Sequence
drop-down list. (If you want to
turn off tray switching, select
Off
.)
7.
Click the
Save Changes
button at the bottom of the screen.
Selecting the Default Tray
If you do not want to use tray switching, you can accept the default order of tray selection. The
default tray contains the paper type and size used for printing jobs unless overwritten by a
driver selection. When the default tray is empty, or contains a different paper type, you are
prompted to load the correct paper type in the tray even if another tray contains the correct
paper type and size for the job.
You can select the default tray by two different methods:
■
The printer’s front panel
■
CentreWare IS
Using the Front Panel
To select a default tray:
1.
Select
Printer Setup
, then press the
OK
button.
2.
Select
Paper Handling Setup
, then press the
OK
button.
