Windows NT 4.x
Phaser® 5500 Laser Printer
3-23
Verifying Installation
1.
Right-click the
My Network Places
icon on the desktop and select
Properties
.
2.
Click the
Protocols
tab to verify that the TCP/IP protocol has been installed.
3.
Click
Add
to install any components not listed, then restart your computer.
4.
Click
Start
, click
Settings
, then click
Control Panel.
5.
Double-click
Services
.
6.
Locate
TCP/IP Print Server
, then verify these column entries:
■
Status
column:
Started
■
Startup
column:
Automatic
7.
Click
Start
, click
Settings
, then click
Printers
.
8.
Right-click the printer icon, then select
Properties
. Verify that you have installed the
correct driver for your printer.
9.
Select the
Ports
tab. Verify that the IP Address in the
Print to the Following Port
list is
identical to the one on the “Configuration Page.” You may need to click the
Configure
Port
button to view the IP address. If necessary, re-select the TCP/IP number used for
your printer.
Printing a Test Page
1.
Click the
General
tab.
2.
Click
Print Test Page
. If the printer still does not print, do one of the following:
■
Access
PhaserSMART
Technical Support on the
Troubleshooting
tab of your printer
driver.
■
Go to
www.xerox.com/office/support
.
infoSMART Knowledge Base Documents (English only)
For more information, go to
www.xerox.com/office/5500infoSMART
to view these
documents.
Reference Name
Title
R1002011338
Installing a Windows NT 4.0 Printer Driver for Printing Over TCP/IP - LPR