Windows 2000, Windows XP, and Windows Server 2003
Phaser® 5500 Laser Printer
3-15
For more information, go to the table of
infoSMART Knowledge Base documents
at the end of
this section.
Other Methods of Installation
Your printer can also be installed on a Windows 2000, Windows XP, or Windows Server 2003
network using one of these methods:
■
Microsoft TCP/IP Protocol
■
Microsoft IPP Port
The following methods can also be used to monitor or configure your printer:
■
A web browser using CentreWare IS if your printer is connected to a Windows 2000,
Windows XP, or Windows Server 2003 network with the TCP/IP protocol enabled.
■
The Xerox CentreWare MC snap-in to Microsoft Management Console for installing or
managing multiple printers on a Windows 2000, Windows XP, or Windows Server 2003
network with TCP/IP protocol enabled. See the
CentreWare MC User Guide
at
www.xerox.com/office/pmtools
.
Note
The CentreWare methods are not discussed in this section. For more information
concerning CentreWare IS, CentreWare DP, or CentreWare MC, see "Printer
Management Software" on page 3-9.
Microsoft TCP/IP Protocol
Note
For Windows XP, select Classic Look or the Windows XP procedures will not match the
steps below. To select Classic Look, click
Start
, then
Settings
, then
Taskbar and Start
Menu
. Select the
Start Menu
tab, then select the
Classic Start
menu
. Click
OK
.
1.
Right-click the
My Network Places
icon on the desktop, then click
Properties
.
2.
Right-click
Local Area Connection
, then click
Properties
.
3.
Click the
General
tab to verify that
Internet Protocol (TCP/IP)
is installed.
■
If the Internet Protocol (TCP/IP) box is checked, the software is installed.
■
If the Internet Protocol (TCP/IP) box is not checked, the software is not installed.
Install TCP/IP software using the documentation provided by Microsoft, then return to
this document.
Adding the Printer
1.
On the desktop click
Start
, then click
Settings
.
2.
Select one of these options:
■
For Windows 2000 click
Printers
, double-click
Add Printer
to launch the
Add
Printer Wizard
, then
c
lick
Next
.
■
For Windows XP and Windows Server 2003, click
Printers and Faxes
. Double-click
Add Printer
to launch the
Add Printer Wizard
, then click
Next
.