Xerox Phaser 5335, Руководство по печати

Страница: 85 / 110

Setting the ESC/P Mode
73
NOTE: If the printer receives a job that specifies print quantity, that quantity will be applied
to the job instead of the quantity set here. After the job is printed, the quantity set on the
control panel also changes to the quantity specified by the job. However, if the job is
requested through a NetWare or LPD port, the quantity on the control panel does not
change to the quantity specified by the job.
Holding down the < > or < > button scrolls through the options in a circular fashion.
Simultaneously pressing the < > and < > buttons displays the default value.
Zoom Mode
„
Fixed % (default)
Automatically reduces or enlarges the document based on [Document Size] and
[Output Size] so that the printable area of [Document Size] fits into that of [Output
Size]. If the sizes specified for [Document Size] and [Output Size] are the same, the
document will be printed at 100% zoom ratio. When [2 Pages Up] is enabled, two
pages will be printed onto the printable area of one page.
„
Variable %
Allows you to set the desired zoom ratio. You can set different zoom ratios for X and
Y directions within the range of 45 to 210% in increments of 1%. The default is
[P 100% L 100%].
„
Whole Output Size
Automatically calculates the zoom ratio based on [Document Size] and [Output
Size] and prints the document so that the physical size of [Document Size] fits into
the printable area of [Output Size].
NOTE: When continuous-form paper is selected for [Document Size], [Fixed %] and
[Whole Output Size] derive the same print result.
Use the < > or < > button when entering the value for [Variable %].
Holding down the < > or < > button scrolls through the options in a circular fashion.
Simultaneously pressing the < > and < > buttons displays the default value.
2 Sided Print
Sets whether or not to print 2 sided.
The following options are available:
[1 Sided] (default)
Prints only on one side of paper.
[Head to Head]
Prints on both sides of paper. This prints the reverse side of paper so that the
finished document opens like a book.
[Head to Toe]
Prints on both side of paper. This prints the reverse side of paper so that the
finished document opens like a calendar.
2 Pages Up
This feature prints two pages of data onto one page. Two pages can be printed side
by side or one on top of the other.
The following options are available:
[1 Page Up] (default)
Does not perform 2 Pages Up.