Xerox Phaser 3600, Руководство пользователя

Страница: 45 / 109

8.4
<Maintenance>
3 Thoroughly roll the cartridge 5 or 6 times to distribute the toner
evenly inside the cartridge.
Note
If toner gets on your clothing, wipe it off with a dry cloth and
wash clothing in cold water. Hot water sets toner into fabric.
4 Hold the print cartridge by the handle and slowly insert the
cartridge into the opening in the printer.
5 Tabs on the sides of the cartridge and corresponding grooves
within the printer will guide the cartridge into the correct position
until it locks into place completely.
6 Close the top cover . Make sure that the cover is securely closed.
Replacing the print cartridge
When the print cartridge is completely empty:
•
Toner Low Replace Toner appears on the display .
• The Status LED lights red.
At this stage, the print cartridge needs to be replaced. For order
information for print cartridges, see page 7.1.
1 Open the top cover .
2 Pull the print cartridge out.
3 Remove the new print cartridge from its bag.
Caution
Do not use sharp objects, such as a knife or scissors, to open
the
print cartridge package. They might scratch the drum of
the cartridge.
4 Roll the cartridge 5 or 6 times to distribute the toner.
Thoroughly roll the cartridge to assure maximum copies per
cartridge. Save the box and the plastic bag for shipping.