Xerox PHASER 3435, Руководство пользователя

Страница: 19 / 98

2.4
<System setup>
Graphic menu
Use the Graphic menu to change settings affecting the quality of the
printed characters and images.
Item Explanation
Resolution
Specify the number of dots printed per inch (dpi).
The higher the setting, the sharper printed
characters and graphics.
• If your print jobs are mostly text, select
600dpi-
Normal for the highest quality printing.
• Select 1200dpi-Best when your job contains
bitmapped images, such as scanned photos or
some graphics, that will benefit from enhanced
line screening.
Darkness
You can lighten or darken the print on the page by
changing the toner density setting. The
Plain
setting usually produces the best result. Use the
Light toner density setting to save toner.
Values: 600dpi-Normal , 1200dpi-Best
Values: Plain , Light, Dark
System Setup menu
Use the System Setup menu to configure a variety of printer features.
Item Explanation
Language
This setting determines the language of the text
that appears on the control panel display and
information printing.
Power Save
When the printer does not receive data for an
extended period of time, power consumption is
automatically lowered. You can set how long
the printer waits before going to power save
mode.
Auto Continue
This item determines whether or not the printer
continues printing when it detects the paper is
mismatched with your paper setting.
•
Off : If a paper mismatch occurs, the message
will remain on the display and the printer will
remain off-line until you insert the correct
paper.
• On : If a paper mismatch occurs, an error
message will display. The printer will go
offline for 30 seconds, then automatically
clear the message and continue printing.
Altitude Adj.
You can optimize print quality according to your
altitude.
Auto CR
This item allows you to append the required
carriage return to each line feed.
Refer to the following samples:
Values: English , FRANCAIS, Espanol,
Portugues B., Deutsch, Italiano...
Values: [ 5 ] Min, [ 10 ] Min, [ 15 ] Min, [ 20 ]
Min, [ 30 ] Min , [ 60 ] Min, [ 120 ] Min
Values: Off, On
Values: Plain , High1, High2, High3
Values: LF , LF+CR
LF LF+CR
AA
BB
CC
AA
BB
CC