Xerox N2125N - DocuPrint B/W Laser Printer, Руководство по обслуживанию

Страница: 173 / 335

02/2000
4-74 DocuPrint N2125
REP 10.14
Initial Issue Repair-Adjustment
REP 10.14 Offset Roll Assembly
Parts List on PL 14.2
Removal
WARNING
Switch off the power and disconnect the Power Cord.
1. Remove the Offset Catch Tray ( REP 10.1 ).
2. Remove the Exit Tray Extension ( REP 10.2 ).
3. Remove the Exit Tray ( REP 10.3 ).
4. Turn the Offset Catch Tray upside down.
5. Remove the Lower Cover ( REP 10.5 ).
6. Hold open the Rear Cover.
7. Remove the Inner Exit Chute Assembly ( REP 10.6 ).
8. Remove the Offset Catch Tray PWB ( REP 10.7 ).
9. Remove the Static Eliminator ( REP 10.9 ).
10. Remove the Stack Full Actuator ( REP 10.12 ).
11. Release the locking tab and remove the Exit Gear ( Figure 1 ).
12. Remove the Exit Gear Bearing ( Figure 1 ).
13. Release the two locking tabs and remove the Offset Level from the Offset Roll Assembly
( Figure 1 ).
14. Remove the Exit Shaft ( Figure 1 ).
15. Remove the Offset Roll Assembly ( Figure 1 ).
Figure 1 Offset Roll Assembly
Replacement
1. Reinstall the components in the reverse order.